3M™ Scotchkote™ Electrical Coating
性能描述
产品类型：
产品标准：
产品认证：
产品极数：
安装方式：
产品描述：
★3M电气喷胶是一种柔和的蜡状物，包含有溶解在石油馏分酒精基的溶剂中的防腐剂。喷胶设计用来作金属表面长期的防腐保护。无腐蚀，可烘干，无氟氯化碳，无卤，使用方便，符合Mil-C-16173。
产品规格
15fl.oz/can
应用范围
电气喷胶用来防止金属部件被腐蚀，在适当的条件下可保持很长时间（室外至少1年）。主要用在电气和机械设备上，包括起重机、传动装置、磨具和其他大型的金属表面。
警告：此产品易燃，不能使用在高能设备。
物理性能
颜色：黑色
闪点：-104度（推进剂） -10度（溶剂）
爆炸下限：1%（体积含量）
爆炸上限：10.6%（体积含量）
使用方法
清理电气设备前，请先关闭设备，将电气喷胶喷嘴顶端靠近表面。在离表面8-10英寸时均匀喷涂产品，在通电前确保喷涂部位已经干燥。
使用后喷雾烘干成一层蜡状薄膜。如果需要祛除喷胶，用石油馏分的溶剂即可。
储存
3M电气喷胶不需要堵上气罐的喷嘴或担心喷涂时会飞溅出来和滴下。将瓶罐垂直放置，在喷涂时将喷嘴推到最下面。在低于49度条件下保存，以保证最长的储存期
3M™ Scotchkote™ Electrical Coating 技术资料（点击下载）
3M™ Scotchkote™ Electrical Coating FD MSDS技术资料（点击下载）
3M™ Scotchkote™ Electrical Coating FD 技术资料（点击下载）
3M™ Scotchkote™ Electrical Coating FD MSDS技术资料（点击下载）
Cableand Wire Management （点击下载）
3M™ Aerosols and Coatings（点击下载）
3M™ Scotchkote™ Electrical Coating FD, in brush-top 15-oz. can
3M ID 80611604135 UPC# 00051128601518 Part Number SCOTCHKOTE FD
3M™ Scotchkote™ Electrical Coating FD is a fast-drying sealant and bonding compound designed to improve weather resistance of taped splices. For direct burial, direct water immersion or above-ground applications. Not restricted for sale in U.S.
Specifications
| Applications | Resist moisture and corrosion |
| Can Size | 15 Fluid Ounce (US) |
| China RoHS - Below MCV | Yes |
| EU RoHS Compliant | Yes |
| Trademark | Scotch |
Features
-
Compatible with Scotch™ brand plastic electrical tapes
-
Fast Drying
-
Flexible when dry
-
Contains own applicator
-
No waste – provided can is resealed after use
Applications
-
Intended for use as an outer seal on plastic tape applications, which are subjected to excessive amounts of oil
-
Protect surfaces against moisture, corrosion and other contaminants
-
Improves the weather resistance and moisture resistance of the taped joint or joint
-
Suitable for direct burial, direct water immersion or above ground applications
-
Application Tip: After taping joints with Scotch™ vinyl plastic electrical tape, apply Scotchkote™ electrical coating evenly over joint, extending a short distance onto the cable insulation. Be sure the surface is clean, dry and free from oil or grease before electrical coating is applied
Specifications
| Good Adhesion to: |
Wood, Metal , Rubber and Plastic |
| Dielectric Strength |
Dry: 450 volts/mil |
| Dielectric Strength |
24 hrs. in water: 200 volts/mil |
| Solvent |
Methyl ethyl ketone, toluene |
Features and Benefits:
- Compatible with Scotch brand plastic electrical tapes
- Fast drying
- Flexible when dry
- Contains own applicator
- No waste - provided can is resealed after use
- Intended for use as an outer seal on plastic tape applications, which are subjected to excessive amounts of oil
- Protect surfaces against moisture, corrosion and other contaminants
- improves the weather resistance and moisture resistance of the taped joint or joint
- Suitable For Direct Burial, Direct Water Immersion Or Above Ground Applications
- 425g
Scotchkote™ Electrical Coating is a fast drying sealant and bonding agent recommended for joints wrapped with plastic electrical tape. Scotchkote provides vinyl tapes with an extra oil, moisture and corrosion-resistant layer of flexible coating for problem areas. The product is supplied in a 425g brush top can.
3M™ Scotchkote™ Electrical Coating
3M™ Scotchkote™ Electrical Coating FD
